Webmail

Welcome to Riransa Inc.

Empowering Healthcare, Innovating Solutions, Transforming Lives

COOLED INCUBATOR (-10°C | +80°C) --- ESI 100

COOLED INCUBATOR (-10°C | +80°C) — ESI 100

Category:

 

 

  • The outer surface of the device is made of rust-resistant electrostatic painted galvanized sheet metal and the inner surface is made of stainless sheet material.
  • The device operates between -5/+60 °C and is set at 37 °C.
  • The cabinet operates with 195-230 V/50 Hz mains voltage.
  • The door of the device is a polyurethane printed block door.
  • There is a sight glass on the inside of the device, which will prevent heat loss inside the device and allow observation of the interior when the outer door is opened.
  • The device has 2 height-adjustable shelves made of stainless material. The shelves are produced with a porous structure that does not prevent air circulation.
  • A user-friendly microprocessor digital control panel is used on the cabinet. This system can store data in its memory for 30 days. It prevents entry of unauthorized persons with its password protection system.
  • The thermostat located on the cabinet control panel can make measurements with an accuracy of 0.1 degrees.
  • The device warns with a visual and audible warning signal when the lower and upper temperature limits are exceeded while the cabinet is operating, when the door of the device is left open, when there is a power outage or low voltage problem.
  • The refrigerator’s cooling system and insulation system do not contain CFC gases that are harmful to the ozone layer.
  • Emsaş A.Ş. Medical devices produced by us have a 2-year warranty.

OPTIONAL

  • THERMAL PRINTER

You cannot copy content of this page